A tumble dryer overheats in a care home laundry late at night. A wok of oil is left on the hob in a tower block. A cooker is switched on by mistake. A cigarette isn’t put out properly. A fire starts in an empty office on a winter evening.
Most fires aren’t caused by anything dramatic. They’re accidents. They happen in well-run buildings, to careful people, every day of the week.
You can’t stop every accident. What you can control is what happens next.
When the fire safety in a building is right, a fire that starts in one room usually stays in that room. The alarm goes off early. People get out, or stay safely where they are. Firefighters arrive to a fire they can deal with. The damage is limited to one room or one flat. Everyone else goes back home.
Most of what makes that possible is passive fire protection. That’s the term for the fire safety built into the fabric of a building: fire doors, fire-resisting walls and floors, and the fire stopping that seals the gaps around pipes and cables. It’s called passive because it doesn’t need power, a person or a signal to work. It’s simply there, doing its job, from the moment a fire starts. Alarms and sprinklers are the opposite. They’re active fire protection, because they have to detect a fire and then do something.
Fires that passive fire protection holds back rarely make the headlines. They should, because they show exactly why the unglamorous parts of fire safety matter.
In this article I’ll look at six real fires where that’s what happened. For each one, I’ve gone beyond the fire and rescue service’s press release to find out more about the building, the people and what happened afterwards. Then I’ll explain what these fires have in common, and how you can check your own building would perform the same way.
Contents
- A laundry fire at a Southsea care home
- A kitchen fire on the top floor of a tower block
- An office fire in a museum
- A school fire nobody saw
- A flat fire in sheltered housing in Southend
- A cooker left on by mistake in Great Easton
- What these fires have in common
- The parts you can’t see
- How to know your building would perform
A laundry fire at a Southsea care home
Shortly before 11.10pm one night in early 2015, a tumble dryer caught fire in the laundry room of Summerlands, a care home for vulnerable adults in Villiers Road, Southsea.
Think about the timing. It was late at night. Many residents would have been asleep, and many needed help to move. Night staffing in a care home is usually lighter than during the day.
The fire alarm went off and staff started to get people out. Three crews from Southsea Fire Station arrived, followed by two from Cosham and a command unit from Portchester. Firefighters rescued six people and helped a seventh walk out. Around 20 more got out by themselves. In all, more than 25 people were evacuated. Two went to hospital with smoke inhalation.
Crews put the fire out quickly and kept it in the laundry. The laundry was badly damaged and there was smoke damage in the corridor. Nowhere else was affected.
Why? The laundry sat off a corridor with a fire door at each end. Both doors were shut and secure. Watch Manager Jason Boh from Southsea Fire Station told The News that because the fire doors did their job, no smoke or flames were allowed to travel out of that area. If they had been open, he said, it could have been a very different situation. The Fire Industry Association reported him saying there could have been fatalities.
He also mentioned something that’s easy to overlook. There was a clear route by road, so the crews could reach the building and attack the fire effectively. Access for fire engines is part of fire safety too.
Why laundries deserve special attention
Laundry fires like this one aren’t rare. Tumble dryers produce heat, and lint, the fluff that builds up in filters and ducts, burns easily. Hampshire’s fire and rescue service has dealt with several laundry fires in buildings where people sleep.
At Shedfield Lodge, a dementia care home near Wickham, a tumble dryer fire in the ground floor laundry led to 31 residents being evacuated. Half the laundry was damaged. Nobody needed hospital treatment.
At Catherine House, a 14-storey student block in Portsmouth, a tumble dryer fire stayed within the ground floor laundry. Firefighters reported that no evacuations were required from the building.
At Pickwick House, a high rise in Buckland, an overloaded dryer caught fire in a top floor laundry room. The fire was hot enough to melt a light fitting on the ceiling. It stayed in that room. Firefighters found it after seeing smoke coming from a door jamb, the edge of the door frame. That’s a small detail that shows the door was doing its job of holding the fire back.
What made the difference at Summerlands. Early warning from the fire alarm, fire doors at both ends of the corridor that were closed and secure, and fire engines that could get to the building quickly. In a building full of people who can’t move fast, that combination bought everyone the time they needed.
A kitchen fire on the top floor of a tower block
On the morning of 5 July 2017, a wok of oil was left on the hob in a flat on the 15th floor of Albion Towers in Southampton. That’s the top floor of the block.
The smoke alarm in the flat went off. A neighbourhood warden in the building heard it, smelled smoke and reported the fire. Neighbours also heard the alarm, looked through the letterbox and called 999. Hampshire Fire and Rescue Service was called at 10.34am and sent more than 50 firefighters. Crews came from several stations, with an aerial ladder platform.
Firefighters wearing breathing apparatus used jets and tactical ventilation, which means controlling openings and using fans to clear smoke in a planned way. The fire was out by 11.23am.
The fire was confined to one flat. Nobody was injured. Residents followed the building’s stay put strategy and remained in their homes. In a block designed for stay put, people who aren’t in the flat on fire are safer staying inside their own flat, because the building is built to keep the fire where it started. A few people from the top floor were helped out by firefighters as a precaution, and later went back home.
Area Manager Tom Simms praised the residents and said the stay put policy worked exactly as it should. Then he summed it up in a sentence I think every building manager should read. He said that both the fire and the building behaved as expected.
Layers of protection
What makes Albion Towers so useful as an example is that several layers of protection were in place, and each one did its part.
The block is designed so that each flat is its own fire compartment. A compartment is a section of a building enclosed by fire-resisting walls, floors and doors, built to hold a fire inside it for a set time. Here, that compartmentation was intact.
The outside of the building mattered too. Southampton City Council had confirmed that the external wall insulation on its tower blocks, including Albion Towers, used non-combustible mineral wool insulation. So a fire that broke out of a window had nothing on the outside of the building to spread through.
And there were people. A warden and neighbours who acted quickly made sure the fire and rescue service was called early.
What happened next
At the time of the fire, Albion Towers was already having a sprinkler system retrofitted, as part of a council programme to fit sprinklers in its tower blocks. Sprinklers are active fire protection. They detect heat and spray water onto a fire as it starts. By June 2018, the sprinklers at Albion Towers were in place.
Since then, Hampshire and Isle of Wight Fire and Rescue Service has reported several fires in Southampton blocks where sprinklers and compartmentation worked together. In 2021, an oven fire on the sixth floor of Copenhagen Tower was suppressed by the sprinklers in the flat, leaving only 10 per cent fire damage. In 2025, sprinklers in a block in Irving Road contained a kitchen fire to a single room while other residents stayed put. The incident commander said the building performed exactly as designed.
What made the difference at Albion Towers. Intact compartmentation, a non-combustible external wall, a working smoke alarm and people who raised the alarm quickly. Each layer backed up the others.
An office fire in a museum
At around 7.40pm on Wednesday 13 February 2019, a fire broke out at Northampton Museum and Art Gallery on Guildhall Road. Four fire crews were called. From the start, reports said the fire was in one room and hadn’t spread.
The fire was in a large open-plan office. That office was left blackened by smoke. But the fire doors leading out of it had been closed when the fire started, and they stopped it going any further.
Three months later, Northamptonshire Fire and Rescue Service released a photograph to show what had happened. On one side of the doors, the walls are black with smoke. On the other side, the walls are clean. The fire service’s community protection manager said it could clearly be seen that the closed fire doors had done their job properly. He pointed out why that matters. Fire doors protect staircases and other escape routes.
A building with a history of fire
This was no ordinary building. Northampton Museum has been on its site since 1884, and part of it was built around the town’s old county gaol, which opened in 1846. Its galleries tell the story of the Great Fire of Northampton in 1675, which destroyed much of the town. The museum also holds one of the largest collections of shoes in the world, with more than 15,000 pairs, recognised by Arts Council England as of national and international importance.
At the time of the fire, the museum was closed to the public for a £6.7 million expansion. It reopened in July 2021.
That timing matters. Buildings that are closed, partly occupied or undergoing works often have fewer people around to spot a fire early. They can also have more temporary hazards. Passive fire protection doesn’t take a day off when a building closes.
What made the difference. Well-fitted fire doors that were kept closed, even in a building that was closed to visitors. In a museum full of irreplaceable collections, the difference between a damaged office and a damaged museum is enormous.
A school fire nobody saw
This is perhaps the most striking example of all, because nobody was there to see it start.
During the school holidays, a fire started on the roof of the creative arts block at a school in Dorset. The building was empty. The fire burned for more than an hour before anyone called 999.
When firefighters arrived, the fire was so intense they couldn’t get close to it. It burned unchecked for several more hours.
And still, the fire doors held. Photographs taken afterwards by Dorset Fire and Rescue Service showed the doors standing firm after hours of exposure to fire. Its Head of Fire Safety, Andy Fox, said the photos clearly show the value of fire doors when they’re correctly installed and maintained.
The general manager of the Fire Door Inspection Scheme, Neil Ashdown, used the same photos to make a wider point. He said common problems such as gaps between doors and frames, unsuitable hinges and missing or badly fitted seals need to be found and fixed before a fire, through a proper inspection regime.
Fire doors are tested and rated by how long they resist fire. You’ll often see ratings like FD30 or FD60, which mean the door is designed to hold back fire for 30 or 60 minutes in a standard test. The S in FD30S means the door also has smoke seals to limit the spread of smoke. A rating is only meaningful if the whole doorset, including the frame, hinges, closer and seals, is installed as it was tested.
Empty buildings and holiday fires
Schools, offices and community buildings spend a lot of their time empty. Evenings, weekends and holidays are when fires can grow unseen, and they’re also when building and maintenance work often happens.
In August 2024, just before the start of the autumn term, a fire broke out in a roof cavity at a school in Clacton while works were being carried out on the roof. Crews found a small section of the roof cavity alight and dealt with it. The fire service recorded it as accidental.
Fires during empty periods are a reason to make sure detection is monitored, so someone is alerted even when the building is empty. They’re also a reason to control contractors carefully. And they’re the moment when passive fire protection matters most, because it keeps working when nobody is there.
What made the difference. Fire doors that were properly installed and maintained, doing their job long after anyone could have expected them to. On a school day, that would have meant time for every pupil and member of staff to get out.
A flat fire in sheltered housing in Southend
At 4.35am on Friday 7 June 2024, firefighters were called to a fire in a second-floor flat at Stephen McAdden House in Burr Hill Chase, Southend. Stephen McAdden House is a sheltered housing scheme run by South Essex Homes. Sheltered housing provides homes for older people, often with some support on site.
When crews arrived, flames were coming from a window and a room in the flat was completely alight. Other residents were shouting that a man was still inside. As firefighters reached the door, the man came out, and they walked him down the stairs to safety and gave him oxygen for smoke inhalation.
Crews then fought the fire. They evacuated the people who lived on the same corridor. Everyone else stayed in their homes, following the building’s stay put strategy. Fire investigators later recorded the cause as accidental, from discarded smoking materials.
The flat was destroyed. But the rest of the floor had only some smoke damage. The watch manager from Southend Fire Station said the fire doors did their job. The fire was contained to the flat where it started, and no one else lost their home.
The landlord’s side of the story
South Essex Homes described what happened next, and it shows the human side of a fire that’s handled well.
Staff were on site within half an hour. The landlord said its fire safety systems had worked very effectively and contained the fire within one flat. It explained that some smoke escaped into the communal hallway only when the fire and rescue service opened the flat door to fight the fire.
That’s worth pausing on. Until firefighters needed to open the door, the flat entrance door held the smoke inside the flat. That’s exactly what it was designed to do.
The residents who had been evacuated were looked after in the block’s communal lounge. Staff supported them according to their individual needs and offered them breakfast. Once it was safe, the caretaking team began cleaning the smoke-affected communal areas, and surveyors came to assess the damage to the flat.
For older residents woken by firefighters before 5am, that care matters. It’s a reminder that fire safety isn’t only about what happens during a fire. It’s also about how people are looked after afterwards.
What made the difference. A flat entrance door that held, compartment walls that kept the fire in one flat, a stay put strategy that worked, and a landlord who looked after its residents.
A cooker left on by mistake in Great Easton
At 10.20pm on Sunday 22 October 2023, Essex County Fire and Rescue Service was called to a sheltered housing block in Dunmow Road, Great Easton, a village near Great Dunmow.
Great Easton is rural. Crews came from four stations: Great Dunmow, Thaxted, Stansted and Leaden Roding. In rural areas, fire engines often have further to travel, and that makes the time a building can buy even more important.
When firefighters arrived, one flat was heavily smoke-logged, which means full of smoke. Crews wearing breathing apparatus went in and found a fire in the kitchen. A cooker had been switched on by accident and something left on the hob had caught fire. The kitchen was badly damaged.
But the fire went no further. Station Manager Lee Hurst said the smoke damage to the flat had been minimised significantly by its fire doors. The fire doors kept the fire in the kitchen and kept the smoke inside the flat, instead of letting it spill into the corridor and neighbouring homes.
Firefighters evacuated five other flats as a precaution. Everyone was fine, and they were all able to go back home once the fire had been dealt with.
A common risk in sheltered housing
The station manager added something important. He said the fire and rescue service often sees hobs being turned on accidentally. His advice was to keep the hob clear as soon as you’ve finished cooking.
For anyone who manages sheltered housing, that’s a useful insight. Older residents may have reduced sight, memory problems or less strength in their hands, and controls can be knocked on by mistake. Items left on a hob turn a small mistake into a fire. Simple measures like hob guards, automatic cut-off devices and regular reminders can reduce the risk. When a fire does start, it’s the fire doors and compartmentation that stop one person’s accident becoming everyone’s emergency.
What made the difference. Fire doors inside the flat, keeping a kitchen fire in the kitchen and the smoke out of the shared corridor, in a rural building where the fire and rescue service had further to travel.
What these fires have in common
Put these six fires side by side and the same things come up again and again.
The fires were accidents. A tumble dryer, a wok, a cooker switched on by mistake, a cigarette, an office fire. Nothing unusual and nothing anyone could have fully ruled out.
Several of them happened at night or in an empty building. Summerlands was late at night. Stephen McAdden House was before 5am. Great Easton was a Sunday night. The museum was closed, and the school was empty for the holidays. These are the times when there are fewest people around to notice a fire, and when passive fire protection matters most.
Many of the people at risk needed help. Three of the six buildings housed older or vulnerable people: a care home and two sheltered housing schemes. Compartmentation buys the time those residents need.
Someone was warned early. Working smoke alarms and fire alarms gave people time, often before they could see any fire at all. At Albion Towers, a warden and neighbours who acted on the alarm made sure firefighters were called quickly.
The doors were shut, and they fitted. Again and again, fire officers point to doors that were closed and correctly installed. Not wedged open. Not missing seals. Not hanging off worn hinges. A fire door relies on its self-closing device, the closer that pulls it shut on its own. It also relies on its intumescent strips, the seals around the edge that swell when heated and close the gap between the door and the frame. If either of those fails, the door can’t do its job.
The building held. In every case, the fire-resisting construction around the fire did its job. That means the walls, floors and ceilings built to resist fire for a set time. The fire stayed in its compartment.
Active and passive protection worked together. Smoke alarms and fire alarms raised the alarm early. Passive fire protection held the fire back while people responded. In Southampton’s later fires, sprinklers added another layer.
The plan worked. In the flats, residents stayed put safely because the building behaved as designed. In the care home, people were helped out while the fire stayed behind closed doors.
People were looked after afterwards. Evacuated neighbours were able to go back home, or were cared for while their building was made safe.
None of these buildings were lucky. They were looked after.
The parts you can’t see
Fire doors get the credit in these stories, and they deserve it. But a fire door is only one part of a bigger system.
A fire door can only hold a fire back if the wall around it holds too. If there’s an unsealed hole above the door where a cable was pushed through, smoke goes straight over the top. If the wall stops at a suspended ceiling, fire can pass through the void above. If a pipe runs through the wall next to the frame with nothing sealing the gap, the door is just one barrier in a wall full of holes.
That’s what fire compartmentation means. The walls, floors, ceilings, doors and fire stopping all have to work together.
A few terms are worth knowing here, because you’ll see them in any fire risk assessment or survey report.
Fire stopping is the material used to seal gaps and openings in fire-resisting walls and floors. Every time a pipe, cable or duct passes through a compartment wall, it leaves a hole. Fire stopping fills that hole so the wall resists fire as it was designed to.
A penetration seal is the fire stopping around a specific service, such as a bundle of cables passing through a wall. It has to be a tested product that suits that service and that wall.
Intumescent materials expand when they get hot. Intumescent sealants, collars, wraps and strips use this to close gaps as a fire develops.
Cavity barriers close off hidden spaces, such as the void above a suspended ceiling or the gap inside a wall, so fire and smoke can’t travel through them unseen.
Fire dampers sit inside ductwork where it crosses a compartment wall or floor. They close in a fire to stop flames and smoke travelling through the ducts.
All of these are passive fire protection. All of them are easy to damage, and almost all of them are out of sight. The doors are the part you can see. Most of the rest is hidden behind plasterboard, above ceiling tiles and inside risers.
In every fire in this article, the hidden parts held. Nobody wrote a press release about the fire stopping in the riser or the cavity barrier above the corridor ceiling. But without them, these stories would have ended very differently.
If you want to understand how all these parts fit together, my guide to fire compartmentation explains it in more detail.
How to know your building would perform
Here’s the uncomfortable question. If a fire started in your building tonight, would it behave like these? Or would it find a way out?
Most building managers I meet can’t answer that with confidence. That isn’t a criticism. Fire stopping goes in during construction and then disappears from view. Contractors come and go. Cables get added and ceilings go back up. Doors get damaged and closers get removed. Nobody sets out to weaken a building’s fire protection. It happens slowly, one small job at a time.
The good news is that you can find out. These are the checks I’d recommend.
Have your fire doors inspected regularly. A fire door inspection checks every part of the doorset, not just the door leaf. Check that doors close fully on their own, that the seals and strips are intact, that the gaps around the edges are right and that nothing is wedging them open. In blocks of flats over 11 metres, the Fire Safety (England) Regulations 2022 require communal fire doors to be checked every three months, and responsible persons must use best endeavours to check flat entrance doors every year.
Get a compartmentation survey. A compartmentation survey is a detailed inspection of a building’s passive fire protection. It looks at the parts you can’t see. That includes fire stopping around services, the walls above ceilings, risers, cavity barriers and fire dampers. It tells you where the gaps are and what needs fixing, in priority order.
Keep your fire risk assessment up to date. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person, usually the employer, owner or managing agent, must have a suitable and sufficient fire risk assessment. It should consider compartmentation and fire doors and tell you when a closer look is needed. It should also consider the people in your building, especially those who would need help to get out.
Look at your known risks. Laundries, kitchens and anywhere people smoke deserve particular attention. Keep tumble dryer filters and ducts clean. Think about hob guards or automatic cut-offs where residents may switch cookers on by mistake.
Plan for the quiet times. Make sure fire detection is monitored, so someone responds at night, at weekends and during holidays. Control contractors carefully, especially when the building is empty.
Control the work that damages compartmentation. Make sure any contractor who cuts a hole in a fire-resisting wall or floor seals it properly afterwards. A permit to work system makes this part of the routine.
Keep the records. Photographs and certificates for fire stopping and door work show what’s been done and when. They’re also the evidence the fire and rescue service, your insurer and your residents will want to see.
Getting it right
The fires in this article were frightening for the people involved. Some lost a kitchen, a laundry, an office or a home. But in every case, the building did what it was meant to do, and everyone else was protected.
That outcome isn’t an accident. It’s the result of good construction, regular checks and people who took the time to look after the parts of a building nobody notices.
My small in-house team carries out compartmentation surveys, fire door inspections and fire risk assessments across Surrey, Berkshire and Hampshire. We don’t carry out remedial works, our advice is independent.
If you’d like to know whether your building would contain a fire the way these did, call me at ESI Fire Safety on 01276 300351.